Filter
Top Products
4–28 User’s Guide
Using the Phone Features
If you select the GPRS Network:
1. Select the GPRS network to edit.
2. Tap Next.
3. After APN: enter the Access Point Name of the server you
are attempting to connect.
4. After Name: enter the Log on for your connection.
5. After Password: enter the password for your connection.
6. Tap Next.
7. On the next screen, tap one of the following:
❏ Dynamic IP address
❏ Static IP address
8. Tap Next.
9. On the next screen, tap one of the following:
❏ Dynamic DNS addresses
❏ Static DNS addresses
10. Tap OK.
If you select the CSD Network:
1. Select the CSD network to edit.
2. Tap Next.
3. After Number: enter the Phone Number of the server you are
attempting to connect.
4. After Name: enter the Login for your connection such as
mtaylor@yahoo.com.
5. After Password: enter the password for your connection.
6. Tap Next.
7. On the next screen, tap one of the following:
❏ Dynamic IP address