Filter
Top Products
4–26 User’s Guide
Using the Phone Features
a. Under Country, tap the down arrow in the box to open
the drop-down menu, then select the correct country
name.
b. Under Operator, tap the down arrow in the box to open
the drop-down menu, then select the correct operator
name.
NOTE: If your operator name appears in the drop-down
list, it is recommended that you use that connection and, if
needed, edit the default settings.
c. Tap OK when the correct Country and Operator are
shown, or tap the following buttons to manually modify
your settings.
d. Tap one of the following, then continue with the
following appropriate section:
◆ Automatic Detection launches the automatic
detection for the network number and the operator
default.
◆ Edit Network Properties to edit the network
settings. This button is grayed out unless an operator
is selected on the screen.
◆ Create Connection to create your own operator
connection setting.
◆ Cancel to close the application without saving any of
the new settings.
NOTE: If a change to the network properties or a new connection
is created, a Warning displays asking you to save the new data.
Automatic Detection
1. When you tap on Automatic Detection on the GSM/GPRS
Settings screen, it launches the network number and operator
default.
2. Tap OK to accept it and exit the GSM/GPRS Settings screen.