Filter
Top Products
Using the Phone Features
User’s Guide 4–31
Creating a GPRS Connection
1. If you tapped GPRS, the next screen requires you to fill in the
following GPRS configuration information. You can get this
information from your GPRS Service Provider if you do not
have it.
❏ APN: Access Point Name of the server that you want to
connect.
❏ Name: Log On name for your connection.
❏ Password: Password for your connection.
2. Tap Next to continue.
3. In the next screen, select the IP Address to be used during
your connection:
❏ Dynamic IP Address
❏ Static IP Address
4. Tap Next.
5. In the next screen, configurate the name-servers to be used
during your connection.
a. Select one of the following:
◆ Dynamic IP addresses
◆ Static IP addresses
b. Enter the required information (DNS, DNS aux, WINS,
and WINS aux).
6. Tap Next.
NOTE: When you are creating a new connection, the next screen
to display at this point is the SMS Text Message screen. Skip to
the section on “Creating an SMS Text Message Connection.”