Filter
Top Products
4-25
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phones
Device Configuration Menu
NTP Configuration Menu for SIP Phones
The NTP Configuration menu displays information about the NTP server and mode configuration used
by SIP Phones.
Table 4-13 describes the options on this menu.
Network Locale
Ver si on
Version of the network locale loaded on the
phone.
Display only—cannot configure.
NTP Configuration
(SIP Phones only)
Menu to view information on NTP server and
mode configuration. For more information, see
NTP Configuration Menu for SIP Phones,
page 4-25.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
Table 4-12 Locale Configuration Menu Options (continued)
Option Description To Change
Ta b l e 4-13 NTP Configuration Menu Options
Option Description To Change
NTP IP Address 1 IP address of the primary NTP server. From Cisco Unified Communications Manager
Administration, choose System
> Phone NTP
Reference.
NTP IP Address 2 IP address of the secondary or backup NTP
server.
From Cisco Unified Communications Manager
Administration, choose System
> Phone NTP
Reference.
NTP Mode 1 Primary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.
From Cisco Unified Communications Manager
Administration, choose System
> Phone NTP
Reference.
NTP Mode 2 Secondary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.
From Cisco Unified Communications Manager
Administration, choose System
> Phone NTP
Reference.