Filter
Top Products
5-3
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Anonymous Call Block
(SIP Phones only)
Allows a user to reject calls from anonymous
callers.
See Cisco Unified Communications Manager
Administration Guide,
SIP Profile
Configuration.
Any Call Pickup Allows users to pick up a redirected call via the
Computer Telephony Integration (CTI)
application, on any line in their call pickup group,
regardless of how the call was routed to the phone.
For more information, see Cisco Unified
Communications Manager Features and
Services Guide,
Call Pickup Configuration.
Assisted Directed Call
Park
Enables users to park a call by pressing only one
button using the Direct Park feature. You must
configure a Busy Lamp Field (BLF) Assisted
Directed Call Park button. When users press an
idle BLF Assisted Directed Call Park button for an
active call, the active call is parked at the Direct
Park slot associated with the Assisted Directed
Call Park button.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide,
Assisted Directed Call Park.
Audible Message
Waiting Indicator
(AMWI)
A stutter tone from the handset, headset, or
speakerphone indicates that a user has one or more
new voice messages on a line.
Note The stutter tone is line-specific. You hear it
only when using the line with the waiting
messages.
For more information, see:
• Cisco Unified Communications Manager
System Guide,
Cisco Unified IP Phones.
• Cisco Unified Communications Manager
Administration Guide,
Directory Number
Configuration.
Auto Answer Connects incoming calls automatically after a ring
or two.
Auto Answer works with either the speakerphone
or the headset.
For more information, see Cisco Unified
Communications Manager Administration
Guide,
Directory Number Configuration.
Auto dial Allows the phone user to choose from matching
numbers in the Placed Calls log while dialing. To
place the call, the user can choose a number from
the Auto Dial list or continue to enter digits
manually.
Requires no configuration.
Auto-pickup Allows a user to use one-touch pickup
functionality for call pickup features.
For more information, see Cisco Unified
Communications Manager Features and
Services Guide,
Call Pickup.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference