Filter
Top Products
5-18
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Secure and Nonsecure
Indication Tone
When a phone is configured as secure (encrypted
and trusted) in Cisco Unified CM, it can be given a
protected status. After that, if desired, the
protected phone can be configured to play an
indication tone at the beginning of a call.
Only protected phones hear these secure or
nonsecure indication tones. Nonprotected phones
never hear tones.
If the overall call status changes during the call, the
indication tone changes accordingly. At that time,
the protected phone plays the appropriate tone.
A protected phone plays or does not play a tone
under these circumstances:
• When the Play Secure Indication Tone option
is enabled (True):
–
When end-to-end secure media is
established and the call status is secure,
the phone plays the secure indication tone
(three long beeps with pauses).
–
When end-to-end nonsecure media is
established and the call status is
nonsecure, the phone plays the nonsecure
indication
tone (six short beeps with brief
pauses).
• If the Play Secure Indication Tone option is
disabled, no tone is played.
• Protected Device—To change the status of
a secure phone to protected, check the
“Protected Device” check box in Cisco
Unified Communications Manager
Administration > Device > Phone >
Phone Configuration.
• Play Secure Indication Tone—To enable
the protected phone to play a secure or
nonsecure indication tone, set the Play
Secure Indication Tone to True. (The
default is False.) You set this option in
Cisco Unified Communications
Manager Administration > System >
Service Parameters. Select the server and
then the Unified CM service. In the
Service Parameter Configuration window,
select the option in the Feature - Secure
Tone area. (The default is False.)
Secure Conference Allows secure phones to place conference calls
using a secured conference bridge.
As new participants are added by using Confrn,
Join, cBarge, Barge softkeys or MeetMe
conferencing, the secure call icon displays as long
as all participants use secure phones.
The Conference List displays the security level of
each conference participant. Initiators can remove
non-secure participants from the Conference List.
Non-initiators can add or remove conference
participants if the Advanced Adhoc Conference
Enabled parameter is set.
For more information about security, see
Overview of Supported Security Features,
page 1-13.
For additional information, see:
• Cisco Unified Communications Manager
System Guide,
Conference Bridges.
• Cisco Unified Communications Manager
Administration Guide,
Conference Bridge
Configuration.
• Cisco Unified Communications Manager
Security Guide.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference