Filter
Top Products
5-10
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Do Not Disturb (DND) When DND is turned on, either no audible rings
occur during the ringing-in state of a call, or no
audible or visual notifications of any type occur.
You can configure the phone to have a softkey
template with a DND softkey or a phone-button
template with DND as one of the selected features.
The following DND-related parameters are
configurable in Cisco
Unified Communications
Manager Administration:
• Do Not Disturb—This check box allows you
to enable DND on a per-phone basis. From
Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
• DND Option—Choose “Call Reject” (to turn
off all audible and visual notifications), or
“Ringer Off” (to turn off only the ringer).
DND Option appears on both the Common
Phone Profile window and the Phone
Configuration window (Phone Configuration
window value takes precedence).
• DND Incoming Call Alert—Choose the type
of alert to play, if any, on a phone for incoming
calls when DND is active. This parameter is
located on both the Common Phone Profile
page and the Phone configuration page (Phone
Configuration window value takes
precedence).
• BLF Status Depicts DND—Enables DND
status to override busy/idle state.
For more information, see Cisco Unified
Communications Manager Features and
Services Guide,
Do Not Disturb.
Enbloc Dialing
(SCCP phones only)
Enbloc dialing enables SCCP to send all digits of a
phone number simultaneously. This feature must
be disabled if either Forced Authorization Codes
(FAC) or Client Matter Codes (CMC) dialing is
being used.
1. To disable enbloc dialing, in Cisco
Unified Communications Manager
Administration, go to Device > Phone.
2. On the Phone Configuration window, in
the “Product Specific Configuration
Layout” area, uncheck the “Enbloc
Dialing” check box, then click Apply
Config, then click Save.
Fast Dial Service Allows a user to enter a Fast Dial code to place a
call. Fast Dial codes can be assigned to phone
numbers or Personal Address Book entries. (See
“Services” in this table.)
For more information, see:
• Cisco Unified Communications Manager
Administration Guide,
Cisco Unified IP
Phone Services Configuration.
• Cisco Unified Communications Manager
System Guide,
Cisco Unified IP Phone
Services.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference