Filter
Top Products
CHAPTER
5-1
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
5
Configuring Features, Templates, Services,
and Users
After you install Cisco Unified IP Phones in your network, configure their network settings, and add
them to Cisco
Unified Communications Manager, you must use Cisco Unified Communications
Manager Administration to configure telephony features, optionally modify phone templates, set up
services, and assign users.
This chapter provides an overview of these configuration and setup procedures. Cisco Unified
Communications Manager documentation provides detailed instructions for these procedures.
For suggestions about how to provide users with information about features, and what information to
provide, see
Appendix A, Providing Information to Users Via a Website.
For information about setting up phones in non-English environments, see Appendix C, Supporting
International Users.
This chapter includes following topics:
• Telephony Features Available for the Cisco Unified IP Phone, page 5-1
• Configuring Product Specific Configuration Parameters, page 5-22
• Configuring Corporate and Personal Directories, page 5-24
• Modifying Phone Button Templates, page 5-25
• Configuring Softkey Templates, page 5-27
• Setting Up Services, page 5-28
• Adding Users to Cisco Unified Communications Manager, page 5-28
• Managing the User Options Web Pages, page 5-29
• Enabling EnergyWise on the Cisco Unified IP Phone, page 5-31
Telephony Features Available for the Cisco Unified IP Phone
After you add Cisco Unified IP Phones to Cisco Unified Communications Manager, you can add
functionality to the phones.
Table 5-1 includes a list of supported telephony features, many of which you
can configure using Cisco Unified Communications Manager Administration. The Reference column
lists Cisco
Unified Communications Manager and other documentation that contains configuration
procedures and related information.