Filter
Top Products
4-29
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phones
Device Configuration Menu
Recording Tone Indicates whether a recording tone (often
referred to as a beep tone) is enabled or disabled
for the phone. If the recording tone option is
enabled, the phone plays the beep tone in both
directions of every call, regardless of whether
the call actually gets recorded. The beep tone
first sounds when a call is answered.
You may want to notify your users if you enable
this option.
Default: Disabled
Related Parameters:
• Recording Tone Local Volume
• Recording Tone Remote Volume
• Recording Tone Duration
Note Other related parameters—Beep tone
frequency in hz, the length of the beep
tone (called duration), and how often
the beep tone plays (called
interval)—are defined on a
per-Network Locale basis in the xml file
that defines tones. This xml file is
usually named tones.xml or
g3-tones.xml.
From Cisco Unified Communications Manager
Administration, choose Device
> Phone > Phone
Configuration.
Recording Tone Local
Vo lu m e
Indicates the loudness setting for the beep tone
that is received by the party whose phone has the
Recording Tone option enabled.
This setting applies for each listening device
(handset, speakerphone, headset).
Range: 0 percent (no tone) to 100 percent (same
level as current volume setting on the phone).
Default: 100
See also: Recording Tone
From Cisco Unified Communications Manager
Administration, choose Device
> Phone > Phone
Configuration.
Recording Tone
Remote Volume
Indicates the loudness setting for the beep tone
that the remote party receives. The remote party
is the party who is on a call with the party whose
phone has the Recording Tone option enabled.
Range: 0 percent to 100 percent. (0 percent is
–66 dBM and 100 percent is –3 dBM.)
Default: 84 percent (–10dBM)
See also: Recording Tone
From Cisco Unified Communications Manager
Administration, choose Device
> Phone > Phone
Configuration.
Table 4-15 Media Configuration Menu Options (continued)
Option Description To Change