Filter
Top Products
5-21
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
SSH Access Allows the administrator to enable or disable the
SSH Access setting using the Cisco Unified CM
Administration application.
This option indicates whether the phone supports
the SSH Access.
Settings include:
• Enabled
• Disabled—default
When enabled, it allows the phone to accept the
SSH connections.
Disabling the SSH server functionality of the
phone blocks the SSH access to the phone.
To configure the parameter in the Cisco
Unified CM Administration application,
choose Device > Phone, select the appropriate
IP Phones, scroll to the Product Specific
Configuration Layout pane and select
Enable from the SSH Access drop-down list
box.
If you set the same parameter in the Common
Phone Profile window (Device > Device
Settings > Common Phone Profile), the
precedence order of the settings is:
3. Phone Configuration window settings
4. Common Phone Profile window settings
Time-of-Day Routing Restricts access to specified telephony features by
time period.
For more information see:
• Cisco Unified Communications Manager
Administration Guide,
Time Period
Configuration.
• Cisco Unified Communications Manager
System Guide,
Time-of-Day Routing.
Time Zone Update Updates the Cisco Unified IP Phone with time zone
changes.
For more information, see Cisco Unified
Communications Manager Administration
Guide,
Date/Time Group Configuration.
Transfer Allows users to redirect connected calls from their
phones to another number.
Requires no configuration.
UCR 2008 The IP Phones using SCCP support Unified
Capabilities Requirements (UCR) 2008 by
providing the following functions:
• Support for Federal Information Processing
Standard (FIPS) 104-2
• Support for TVS IPv6
• Support for 80-bit SRTCP Tagging
As an IP Phone administrator, some of these
functions require you to set up specific parameters
in Cisco Unified Communications Manager
Administration.
See Setting up UCR 2008, page 5-34
Video mode
(SCCP phones only)
Allows a user to select the video display mode for
viewing a video conference, depending on the
modes configured in the system.
For more information:
• See Cisco Unified Communications
Manager Administration Guide,
Conference Bridge Configuration.
• See Cisco Unified Communications
Manager System Guide,
Understanding
Video Telephony.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference