Filter
Top Products
4-21
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phones
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-18
Line Settings Menu for SIP Phones
The Line Settings menu displays information that relates to the configurable parameters for the lines on
your SIP Phone.
Table 4-9 describes the options in this menu.
Enable VAD This value is set to No by default. From Cisco Unified
Communications Manager
Administration, choose Device
>
Device Settings > SIP Profile.
Start Media Port Displays the start Real-Time Transport Protocol (RTP) range for
media.
From Cisco Unified
Communications Manager
Administration, choose Device
>
Device Settings > SIP Profile.
End Media Port Displays the end Real-Time Transport Protocol (RTP) range for
media.
From Cisco Unified
Communications Manager
Administration, choose Device
>
Device Settings > SIP Profile.
NAT Enabled Displays if Network Address Translation (NAT) is enabled. This
value will always be set to false.
Display only—cannot configure.
NAT Address Displays the WAN IP address of the NAT or firewall server. This
value will always be set to null.
Display only—cannot configure.
Call Statistics This value is set to No by default. From Cisco Unified
Communications Manager
Administration, choose Device
>
Device Settings > SIP Profile.
Table 4-8 SIP General Configuration Menu Options (continued)
Option Description To Change
Ta b l e 4-9 Line Settings Menu Options
Option Description To Change
Name Displays the lines and the number used to register each line. Use Cisco Unified
Communications Manager
Administration to modify.
Short Name Displays the short name configured for the line. Use Cisco Unified
Communications Manager
Administration to modify.