Filter
Top Products
8-9
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-23091-01
Chapter 8 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phones
Status Menu
Network Statistics Screen
The Network Statistics screen displays information about the phone and network performance. Table 8-3
describes the information that appears in this screen.
To display the Network Statistics screen, follow these steps:
Procedure
Step 1 Press the Settings button
Step 2 Select Status
Step 3 Select Status > Network Statistics
Step 4 To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press the Clear softkey.
Step 5 To exit the Network Statistics screen, press the Exit softkey.
Ta b l e 8-3 Network Statistics Message Information
Item Description
Rx Frames Number of packets received by the phone
Tx Frames Number of packets sent by the phone
Rx Broadcasts Number of broadcast packets received by the phone
One of the following values:
• Initialized
• TCP-timeout
• CM-closed-TCP
• TCP-Bad-ACK
• CM-reset-TCP
• CM-aborted-TCP
• CM-NAKed
• KeepaliveTO
• Failback
• Phone-Keypad
• Phone-Re-IP
• Reset-Reset
• Reset-Restart
• Phone-Reg-Rej
• Load Rejected HC
• CM-ICMP-Unreach
• Phone-Abort
Cause of the last reset of the phone
Elapsed Time Amount of time that has elapsed since the phone last rebooted