Filter
Top Products
Advanced Operational Parameters
41-001160-01, Rev 00, Release 2.3 A-221
Advanced Operational Parameters
The following parameters in this section allow the system administrator to set
advanced operational features on the IP phones.
Blind Transfer Setting
Update Caller ID Setting.
Parameter –
sip cancel after blind transfer
Configuration Files aastra.cfg, <mac>.cfg
Description Forces the phone to use the Blind Transfer method available in software
prior to release 1.4. This method sends the CANCEL message after the
REFER message when blind transferring a call.
Format Boolean
Default Value 0 (disabled)
Range 0 (disabled)
1 (enabled)
Example sip cancel after blind transfer: 1
Parameter –
sip update callerid
Configuration Files aastra.cfg, <mac>.cfg
Description Enables or disables the updating of the Caller ID information during a
call.
Format Boolean
Default Value 0 (disabled)
Range 0 (disabled)
1 (enabled)
Example sip update callerid: 1