Filter
Top Products
Network Settings
41-001160-01, Rev 00, Releaes 2.3 4-29
Configuring Network and Session Initiation Protocol (SIP) Features
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4Select Network Settings.
5Select NAT Settings.
6Select Nortel NAT.
7 Press Change to set either “Enabled” or “Disabled”.
8 Press Done (3 times) to finish.
Note: The session prompts you to restart the IP phone to apply the configuration settings.
9Select Restart.