Filter
Top Products
Operational Features
41-001160-01, Rev 00, Release 2.3 5-315
Configuring Operational Features
4 Enter an XML URI for an incoming call event in the “Incoming Call” field. For example:
http://10.50.10.140/incoming.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an incoming call
event occurs.
Note: For an incoming call event, use the associated variables indicated in the table “Action URIs
and Associated Variables” on page 5-310.
5 Enter an XML URI for an outgoing call event in the “Outgoing Call” field. For example:
http://10.50.10.140/outgoing.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an outgoing call
event occurs.
Note: For an outgoing call event, use the associated variables indicated in the table “Action URIs and
Associated Variables” on page 5-310.
6 Enter an XML URI for an offhook event in the “Offhook” field. For example:
http://10.50.10.140/offhook.php?state=$$LINESTATE$$
This parameter specifies the URI for which the phone executes a GET on when an offhook event
occurs.
Note: For an offhook event, use the associated variables indicated in the table “Action URIs and
Associated Variables” on page 5-310.
7 Enter an XML URI for an onhook event in the “Onhook” field. For example:
http://10.50.10.140/onhook.php?state=$$LINESTATE$$
This parameter specifies the URI for which the phone executes a GET on when an onhook event
occurs.
Note: For an onhook event, use the associated variables indicated in the table “Action URIs and
Associated Variables” on page 5-310.
8 To configure a Disconnected event, see the section, “Action URI Disconnected” on page 5-316.
9 To configure an XML SIP Notify event, see the section, “XML SIP Notify Events” on page 5-319.
Aastra Web UI