Firmware Installation Information
41-001160-01, Rev 00, Releaes 2.3 1-35
Overview
Configuration Server Requirement
A basic requirement for setting up the IP phone is to have a configuration server.
The configuration server allows you to:
• Store the firmware images that you need to download to your IP phone.
• Stores configuration files for the IP phone
• Stores the software when performing software upgrades to the IP phone
Reference
To set the protocol for your configuration server, see Chapter 4, the section,
“Configuring the Configuration Server Protocol” on page 4-104.
For setting up your configuration server, see Appendix B, “Configuration Server
Setup.”
Note: If you use TFTP, the configuration server must be able to accept
connections anonymously.