Aastra Telecom 5i Series Telephone User Manual


  Open as PDF
of 1134
 
Configuration Server Protocol
4-110 41-001160-01, Rev 00, Releaes 2.3
IP Phone Administrator Guide
2 Select the protocol from the "Download Protocol" list box. Valid values are TFTP, FTP, HTTP, and
HTTPS. Default is TFTP.
The IP phone uses the protocol you select to download new firmware and configuration files from the
configuration server. Use the following table to configure the applicable server.
Aastra Web UI
Step Action
TFTP
- Enter an IP address or fully qualified domain name in the "TFTP Server" field.
- Enter the path name in the “TFTP Path” field for which the configuration files reside on the
TFTP server for downloading to the IP Phone. If the IP phone’s files are located in a
sub-directory beneath the server’s root directory, the relative path to that sub-directory
should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\57i\configfiles.
Optional: You can also configure an alternate TFTP server if required. If "Use Alternate
TFTP" is enabled, you must also enter an IP address or qualified domain name for the
alternate server in the "Alternate TFTP" field. You can also enter a path name for the alter-
nate TFTP server in the “Alternate TFTP Path” field.
FTP
- Enter an IP address or fully qualified domain name in the "FTP Server" fiel.d.
- Enter the path name in the “FTP Path” field for which the configuration files reside on the
FTP server for downloading to the IP Phone. If the IP phone’s files are located in a
sub-directory beneath the server’s root directory, the relative path to that sub-directory
should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\57i\configfiles.
Optional: You can enter a username and password for accessing the FTP server if
required.
- Enter a username for a user that will access the FTP server in the "FTP User Name" field.
- Enter a password for a user that allows access to the FTP server in the "FTP Password"
field.