Aastra Telecom 5i Series Telephone User Manual


  Open as PDF
of 1134
 
Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-01, Rev 00, Release 2.3 A-209
Format sprecode - Indicates the softkey is configured to automatically
activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
park - Indicates the softkey is configured to park incoming calls when
pressed.
pickup - Indicates the softkey is configured to pick up parked calls
when pressed.
lcr - Indicates the softkey is configured for “last call return” when
pressed.
call forward - Indicates the softkey is configured for accessing the
Call Forward features on the phone. A Call Forwarding Mode must be
enabled to use this softkey. “Account” mode is the default.
blf/xfer - Indicates the softkey is configured to transfer calls AND
configured for BLF on a single key.
speeddial/xfer - Indicates the softkey is configured to transfer calls
AND configured for speeddialing to a specific number.
callers - Indicates the softkey is set for accessing the Callers List.
directory - Indicates the softkey is set for accessing the Directory
List.
icom - Indicates the softkey is set to be used as the Intercom key.
services - (not available on the 53i) Indicates the softkey is set to be
used as the Services key.
phonelock - Indicates the softkey is set to be used to lock/unlock the
phone.
paging - Indicates the softkey is set for Group Paging on the phone.
Pressing this key automatically sends a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without
involving SIP signaling.
empty - Indicates the softkey is configured to force a blank entry on
the IP phone display for a specific softkey. The soft keys are added in
order (from softkey1 to softkey20) after any hard-coded keys have
been added. If a particular soft key is not defined, it is ignored.
Default Value none