Filter
Top Products
Configuration Server Protocol
4-106 41-001160-01, Rev 00, Releaes 2.3
IP Phone Administrator Guide
9 Enter the IP address of the protocol server (in dotted decimal format).
Use the following table to configure the applicable server.
IP Phone UI
Step Action
TFTP Settings
-Select Primary TFTP
- Enter the IP address or fully qualified domain name of the primary TFTP server.
- Press Done or Set to save the change.
-Select Pri TFTP Path.
- Enter the path name for which the configuration files reside on the TFTP server for down-
loading to the IP Phone. If the IP phone’s files are located in a sub-directory beneath the
server’s root directory, the relative path to that sub-directory should be entered in this field.
Enter the path name in the form folderX\folderX\folderX. For example, ipphone\57i\config-
files.
Optional: You can also configure an Alternate TFTP server and Alternate TFTP Path if
required by selecting the “Alternate TFTP” and the “Alt TFTP Path” parameters.
- From the TFTP Settings menu, select Alternate TFTP and press Enter.
- Enter the IP address or fully qualified domain name of the alternate TFTP server.
- Press Done or Set to save the change.
-Select Alt TFTP Path.
- Enter the path name for which the configuration files reside on the Alternate TFTP server for
downloading to the IP Phone. If the IP phone’s files are located in a sub-directory beneath
the server’s root directory, the relative path to that sub-directory should be entered in this
field. Enter the path name in the form folderX\folderX\folderX. For example,
ipphone\57i\configfiles.
FTP Settings
-Select FTP Server.
- Enter the IP address or fully qualified domain name of the FTP server.
- Press Done or Set to save the change.
-Select FTP Path.
- Enter the path name for which the configuration files reside on the FTP server for download-
ing to the IP Phone. If the IP phone’s files are located in a sub-directory beneath the server’s
root directory, the relative path to that sub-directory should be entered in this field. Enter the
path name in the form folderX\folderX\folderX. For example, ipphone\57i\configfiles.
Optional: You can enter a username and password for accessing the FTP server if required:
-Select FTP Username.
- Enter a username for accessing the FTP server.
- Press Done.
-Select FTP Password.
- Enter a password for accessing the FTP server.
- Press Done or Set.