Filter
Top Products
Operational, Basic, and Advanced Parameters
A-122 41-001160-01, Rev 00, Release 2.3
IP Phone Administrator Guide
Call Forward Key Mode Settings
Parameter –
call forward key mode
Aastra Web UI: Basic Settings->Preferences->General
Configuration Files aastra.cfg, <mac>.cfg
Description Sets the mode for how the phone uses “call forwarding” (CFWD)
• account
The account mode allows you to configure CFWD on a per account
basis. Pressing a configured CFWD key applies to the account in
focus.
• phone
The Phone mode allows you to set the same CFWD configuration
for all accounts (All, Busy, and/or No Answer). When you
configure the initial account, the phone applies the configuration to
all other accounts. (In the Aastra Web UI, only the account you
configured is enabled. All other accounts are grayed out but set to
the same configuration.) Using the Aastra Web UI, if you make
changes to that initial account, the changes apply to all accounts on
the phone.
• custom
The Custom mode allows you to configure CFWD for a specific
account or all accounts. You can configure a specific mode (All,
Busy, and/or No Answer) for each account independently or all
accounts. On the 9143i, 51i, and 53i phones, you can set all
accounts to ALL On or ALL Off. On the 9480i, 9480i CT, 55i, 57i,
and 57i CT, you can set all accounts to All On, All Off, or copy the
configuration for the account in focus to all other accounts using a
CopytoAll softkey.
Notes:
1. If there is no CFWD key configured on the phone or it is removed,
you can still set the CFWD modes via the IP Phone UI at the path
Options->Call Forward.
2. If there is only one account configured on the phone, then the
mode setting is ignored and the phone behaves as if the mode was set
to “Phone”.
3. When configuring a CFWD mode (All, Busy, No Answer) for an
account, you must configure a CFWD number for that mode in order for
the mode to be enabled.
Format Integer
Default Value 0 (account)
Range 0 (account)
1 (phone)
2 (custom)
Example call forward key mode: 2