Filter
Top Products
Configuration Server Protocol
41-001160-00, Rev 01 Release 2.0 4-13
Network Configuration of the IP Phones
Configuring the IP Phones
Configuration Server Protocol
You can download new versions of firmware and confguration files from the
configuration server to the IP phone using any of the following types of protocols:
TFTP, FTP, HTTP, and HTTPS. The TFTP setting is the default download
protocol. You can configure the type of protocol that the IP phone uses by setting
it in the configuration files, the IP phone UI, or the Aastra Web UI.
Configuring the Configuration Server Protocol
Use the following procedure to configure the configuration server protocol.
Note: For DHCP to automatically populate the IP address or domain
name for the TFTP server, your DHCP server must support Option 66.
For more information, see this chapter, the section, “DHCP” on page 4-4.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Configuration
Server Settings” on page A-11.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Network.
3Select Download Protocol.
4Select "Use TFTP", "Use FTP", "Use HTTP", or “HTTPS”.
The IP phone uses the protocol you select to download new firmware and configuration files from
the configuration server.
5Press Done to save the changes.