Filter
Top Products
Administrator Level Options
41-001160-00, Rev 01 Release 2.0 3-23
Administrator Options
Administrator Options
Configuration Server Settings
The configuration server stores the firmware images, configuration files, and
software when performing software upgrades to the IP phone. An administrator
can configure the following parameters for the configuration server:
• Download Protocol
Protocol to use for downloading new versions of firmware and configuration
files to the IP phone. Valid values are TFTP, FTP, and HTTP. Default is TFTP.
• TFTP Server
IP address or qualified domain name of the TFTP server. You can select a
primary or alternate TFTP server and then assign an IP address or qualified
domain name to your selection. Set this option if TFTP is the download
protocol selected.
• FTP Server
IP address or network host name of the FTP server. If required, you can also
assign a user name and password for access to the FTP server. Set this option
if FTP is the download protocol selected. If you enter a network host name,
DNS must also be set.
• HTTP Server
IP address of the HTTP server. You can also assign an HTTP path to the
HTTP server. Set this option if HTTP is the download protocol selected.
• HTTPS Server
IP address of the HTTPS server. You can also assign an HTTPS path to the
HTTPS server. Set this option if HTTPS is the download protocol selected.
Note: For DHCP to automatically populate the IP address or domain
name for the TFTP server, your DHCP server must support Option 66.
For more information, see Chapter 4, the section, “DHCP” on page 4-4.