Filter
Top Products
Administrator Level Options
3-14 41-001160-00, Rev 01 Release 2.0
IP Phone Administrator Guide
Administrator Options
• NTP Time Servers
Enables or disables the time server. This parameter affects time server1, time
server2, and time server3. Valid values are 0 (enable) and 1 (disable). Default
is 1 (disable).
• Time Server 1, 2, and 3
The primary, secondary, and tertiary time server's IP address or qualified
domain name. If the "NTP Time Server" parameter is enabled, and the
primary and secondary time servers are not configured or cannot be accessed,
the value for Time Server 3 is used to request the time.
• HTTPS Client Method
Defines the security method that the client advertises to the server during the
Secure Socket Layer (SSL) handshake. Valid values are SSL 3.0 and TLS 1.0.
Default is SSL 3.0.
• HTTPS Server - Redirect HTTP to HTTPS
Allows or disallows redirection from the HTTP server to the HTTPS server
• HTTPS Server - Block XML HTTP POSTs
Enables or disables the blocking of XML scripts from HTTP POSTs.
Type of Service (ToS), DSCP
Network settings also allows you to set Type of Service (ToS) and Differentiated
Services Code Point (DSCP).
Reference
For more information about ToS and DSCP see Chapter 4, the section, “Type of
Service (ToS), Quality of Service (QoS), and DiffServ QoS” on page 4-32.
VLAN
You can enable or disable VLAN and set specific VLAN IDs and priorities under
Network Settings.
Reference
For more information about VLAN, see Chapter 4, the section, “Virtual LAN
(optional)” on page 4-31.