Filter
Top Products
Hard Key Parameters
A-108 41-001160-00, Rev 01 Release 2.0
IP Phone Administrator Guide
Appendix A
— Softkey/Programmable Key/Feature Key Parameters
This section provides the softkey and programmable key parameters you can
configure on the IP phones. The following table provides the number of softkeys
and programmable keys you can configure, and the number of lines available for
each type of phone.
Parameter –
map conf key to
Map Conf Key To
(in Web UI)
Aastra Web UI Basic Settings->Preferences->Key Mapping
Configuration Files aastra.cfg, <mac>.cfg
Description Sets the Conf key as a speedial key if a value is entered for this
parameter. If you leave this parameter blank, the Conf key returns to its
original functionality.
Note: If you configure the Conf key for speeddialing on the 57i CT Base
Station, the Conf key on the 57i CT handset retains its original
functionality. The Conf key on the handset is not configured for speeddial.
Format Integer
Default Value N/A
Range N/A
Example map conf key to: 5551267
IP
Phone
Model
Softkeys
Additional Softkeys
with Expansion
Modules
Programmable
Keys
Lines
Available
Handset
Keys
Available
53i - - 6 Top Keys
(Up to 6
functions)
9-
55i 6 Bottom Keys
(Up to 20
functions)
36 to 108*
(Model 536EM)
6 Top Keys
(Up to 6
functions)
9-
57i 12 Top and
Bottom Softkeys
(Up to 10
functions on top
keys; Up to 20
functions on
bottom keys)
36 to 108*
(Model 536EM)
60 to 180**
(Model 560EM)
- 9-