Filter
Top Products
Administrator Level Options
3-6 41-001160-00, Rev 01 Release 2.0
IP Phone Administrator Guide
Administrator Options
Phone Status
The Phone Status on the IP Phone displays the network status and firmware
version of the IP phone. This option also allows you to restart the phone, and set
the phone to factory defaults.
You can display phone status and reset the phone using the IP phone UI or the
Aastra Web UI.
Phone Status via IP Phone UI
In the IP phone UI, the Phone Status options are available to the user and the
administrator and do not require a password entry. However, the "Factory
Default" option is for administrator use only.
The following information displays for phone status on the IP phone UI:
Phone Status Screen for 53i Phone
Phone Status Screen for 55i, 57i, and 57i CT Phones
Phone Status
1. Network Port 1
2. Network Port 2
2. Firmware Version
3. Restart Phone
4. Restore Defaults
=Enter
=Next
Phone Status
Show
Done
1. Network Status
2. Firmware Version
3. Restart Phone
4. Factory Default