Filter
Top Products
Operational, Basic, and Advanced Parameters
41-001160-00, Rev 01 Release 2.0 A-5
Configuration Parameters
Appendix A
Operational, Basic, and Advanced Parameters
The following sections provide the configuration parameters you can configure on
the IP phone. Each parameter table includes the name of the parameter, a
description, the format, default value, range, and example. The table also provides
the method for which the parameters can be configured (IP phone UI, Aastra Web
UI, or configuration files).
Network Settings
Parameter –
dhcp
DHCP
(in Web UI)
IP phone UI Options->Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description Enabling DHCP will populate most of the network information. The DHCP
server should serve the network information that the IP phone requires. If
the IP phone is unable to get any required information then it should be
entered manually. Parameters affected: ip. Use "0" to disable DHCP and
"1" to enable DHCP.
Format Integer
Default Value 1
Range 0 or 1
Example dhcp: 1
Parameter –
ip
Ip Address
(in Web UI)
IP phone UI Options->Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description This parameter assigns a static IP address to the IP phone device.
Format IP address
Default Value 0.0.0.0
Range Not Applicable
Example ip: 192.168.0.25