Filter
Top Products
Basic Network Settings
41-001160-00, Rev 01 Release 2.0 4-7
Network Configuration of the IP Phones
Configuring the IP Phones
Configuring Network Settings Manually
If you disable DHCP on your phone, you need to configure the following network
settings manually:
• IP Address
• Subnet Mask
• Gateway
• Primary DNS
• Secondary DNS
You can configure the network settings using the configuration files, the IP phone
UI, or the Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Network
Settings” on page A-5.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Network.
3Select IP Address and enter the IP address of the phone.
4Select Subnet Mask and enter the subnet mask.
5Select Gateway and enter the gateway address.
6Select DNS and enter a Primary and/or Secondary DNS server.
7 Press Done to save the changes.
The IP phone is manually configured.
You can now continue configuring the IP phone if required using the IP Phone UI.