Filter
Top Products
Hard Key Parameters
A-110 41-001160-00, Rev 01 Release 2.0
IP Phone Administrator Guide
Appendix A
Softkey Settings for 55i, 57i, 57i CT
The value of "N" for the following parameters is dependent on the number of
softkeys available on the55i, 57i, and 57i CT models. See the table above for
applicable values.
Parameter –
softkeyN type
Type
(in Web UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <mac>.cfg
Description The type of softkey to configure. Valid types are:
•none - Indicates softkey and/or programmable key is disabled.
• line - Indicates softkey and/or programmable key is configured for
line use.
• speeddial - Indicates softkey and/or programmable key is configured
for speeddial use. Speeddial is applicable to the 536EM and 560EM
also.
• do not disturb (dnd)- Indicates softkey and/or programmable key is
configured for do not disturb on the phone. This option is "Do Not
Disturb" in the Aastra Web UI).
• blf - Indicates softkey and/or programmable key is configured for
Busy Lamp Field (BLF) use. User can dial out on a BLF configured
key. BLF is applicable to the 536EM and 560EM also.
• list - Indicates softkey and/or programmable key is configured for
BLF list use. (This option is BLF/List in the Aastra Web UI). User can
dial out on a BLF List configured key.
• xml - Indicates the softkey and/or programmable key is configured to
accept an XML application for accessing customized XML services.
You can also specify an XML softkey URL for this option.
• flash - Indicates the softkey and/or programmable key is set to
generate a flash event when it is pressed on the 57i and 57i CT, or a
feature key is pressed on the 57i CT handset. The IP phone
generates flash events only when a call is connected and there is an
active RTP stream (for example, when the call is not on hold).
• sprecode - Indicates the softkey and/or programmable key is
configured to automatically activate specific services offered by the
server. For example, if the sprecode value of *82 is configured, then
by pressing the softkey, *82 automatically activates a service
provided by the server.
• park - Indicates the softkey and/or programmable key is configured to
park incoming calls when pressed.
• pickup - Indicates the softkey and/or programmable key is configured
to pick up parked calls when pressed.
• lcr - Indicates the softkey and/or programmable key is configured for
“last call return” when pressed.