Filter
Top Products
Advanced Network Settings
41-001160-00, Rev 01 Release 2.0 4-53
Network Configuration of the IP Phones
Configuring the IP Phones
Configuring Advanced SIP Settings (optional)
Using the configuration files or the Aastra Web UI, you can set more advanced
SIP settings on the IP phone such as:
Refer to Appendix A,“Advanced SIP Settings” on page A-58 for a description of
each of the above parameters.
Use the following procedures to configure the advanced SIP settings on the IP
phone.
Configuration File Parameters Aastra Web UI Parameters
sip explicit mwi subscription
sip explicit mwi subscription period
sip send mac (see Chapter 6)
sip send line (see Chapter 6)
sip session timer
sip T1 timer
sip T2 timer
sip transaction timer
sip transport protocol
sip registration retry timer
sip registration timeout retry timer
sip registration renewal timer
sip blf subscription period (see Chapter 5)
Explicit MWI Subscription
Explicit MWI Subscription Period
Send MAC Address in REGISTER Message (see Chapter 6)
Send Line Number in REGISTER Message (see Chapter 6)
Session Timer
T1 Timer
T2 Timer
Transaction Timer
Transport Protocol
Registration Failed Retry Timer
Registration Timeout Retry Timer
Registration Renewal Timer
BLF Subscription Period (see Chapter 5)
Note: You configure advanced SIP settings on a global basis only.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Advanced SIP
Settings” on page A-58.