Filter
Top Products
Administrator Level Options
3-8 41-001160-00, Rev 01 Release 2.0
IP Phone Administrator Guide
Administrator Options
Phone Status via Aastra Web UI
In the Aastra Web UI, the "Network Attributes", "Hardware Information", and
"Firmware Information" options are read only and available for viewing by the
user and administrator. Resetting the IP phone to factory defaults using the Aastra
Web UI (Operation->Reset->Current Settings) is available to the administrator
only.
The following information displays for phone status in the Aastra Web UI at the
location Status->System Information. This information is available to the user
and the administrator as read-only.
• Network Attributes
Displays the network status of the Ethernet ports at the back of the phone. You
can also view the phone’s IP and MAC addresses. Information in this field
includes Link State, Negotiation, Speed, and Duplex for Port 0 and Port 1.
• Hardware Information
Displays the current IP phone platform and the revision number.
• Firmware Information
Displays information about the firmware that is currently installed on the IP
phone. Information in this field includes Firmware Version, Firmware Release
Code, Boot Version, Release Date/Time.