Filter
Top Products
Hard Key Parameters
41-001160-00, Rev 01 Release 2.0 A-117
Configuration Parameters
Appendix A
Programmable Key Settings for 53i and 55i
• The value of "N" for the following parameters is dependent on the number of
programmable keys available on the 53i models. See the table on page 108 for
the applicable values
.
Parameter –
prgkeyN type
Type
(in Web UI)
Aastra Web UI Operation->Programmable Keys
Configuration Files aastra.cfg, <mac>.cfg
Description The type of programmable key to configure. Valid types are:
•none - Indicates no setting for programmable key.
• line - Indicates programmable key is configured for line use.
• speeddial - Indicates programmable key is configured for speeddial
use
• dnd - Indicates programmable key is configured for do not disturb
on the phone. This option is "do not disturb" in the Aastra Web UI).
• blf - Indicates programmable key is configured for Busy Lamp Field
(BLF) use. User can dial out on a BLF configured key.
• list - Indicates programmable key is configured for BLF list use.
User can dial out on a BLF List configured key.
• xml - Indicates programmable key is configured to accept an XML
application for accessing customized XML services. You can also
specify an XML softkey URL for this option.
• flash - Indicates programmable key is set to generate a flash event
when it is pressed on the 53i. The IP phone generates flash events
only when a call is connected and there is an active RTP stream (for
example, when the call is not on hold).
• sprecode - Indicates programmable key is configured to
automatically activate specific services offered by the server. For
example, if the sprecode value of *82 is configured, then by
pressing the softkey, *82 automatically activates a service provided
by the server.
• park - Indicates programmable key is configured to park incoming
calls when pressed.
• pickup - Indicates programmable key is configured to pick up
parked calls when pressed.
• lcr - Indicates programmable key is configured for “last call return”
when pressed.
• directory - Indicates programmable key is configured to access the
Directory List.
• callers list - Indicates programmable key is configured to access
the Callers List.
• conference - Indicates programmable key is configured as a
conference key. Enter as “conf” in configuration files.
• transfer - Indicates programmable key is configured as a Transfer
key for transferring calls. Enter as “xfer” in configuration files.
Format Te xt