Filter
Top Products
Advanced Network Settings
41-001160-00, Rev 01 Release 2.0 4-37
Network Configuration of the IP Phones
Configuring the IP Phones
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Network
Address Translation (NAT) Settings” on page A-18.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Network.
3 Select VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
4Select VLAN Enable, and press Change to set VLAN Enable to Yes (or No to disable)
5 Press Done to save the changes.
6Select Phone.
7Select Priority.
8Select Other and enter a non-IP priority value from 0 to 7 for non-IP packets.
9 Press Done to save the changes.
10 Press Done again to return to the VLAN Phone menu.
To set VLAN ID and priority for Port 0:
11 Select VLAN ID and enter a value from 1 to 4094 to specify the VLAN ID of Port 0.
12 Press Done to save the change.
13 Select Priority.
14 Select a VLAN Protocol (SIP, RTP, and/or RTCP).
15 Enter a VLAN priority value from 0 to 7 for the associated Protocol.
16 Press Done to save the changes.
17 Press Done again to return to the VLAN Settings menu.
To set VLAN ID and priority for Port 1 (passthrough port):
18 Select Passthrough.