Filter
Top Products
Hard Key Parameters
41-001160-00, Rev 01 Release 2.0 A-119
Configuration Parameters
Appendix A
Parameter –
prgkeyN value
Value
(in Web UI)
Aastra Web UI Operation->Programmable Keys
Configuration Files aastra.cfg, <mac>.cfg
Description This is the value you assign to the programmable key.
The “prgkeyN value” parameter can be set for the following softkey types
only:
• speeddial
•line
•BLF
• sprecode
•XML
•Park
• Pickup
Notes:
1.. For speedial - Value is the phone number or extension to enter for
the programmable key.
2. For line - Value is optional; for example L4.
3. For blf - Value is the extension you want to monitor.
4. For sprecode - Value is dependent on services offered by server.
5. For xml - Value is IP address of the XML application.
6. For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page 5-74. For
Park/Pickup examples, see Chapter 5, the section “Model 53i
Examples” on page 5-79.
Format Integer
Default Value N/A
Range N/A
Example prgkey1 value: 411