Filter
Top Products
Advanced Network Settings
41-001160-00, Rev 01 Release 2.0 4-41
Network Configuration of the IP Phones
Configuring the IP Phones
Network Time Servers
Network Time Protocol (NTP) is a protocol that the IP phone uses to synchronize
the phone clock time with a computer (configuration server) in the network.
To use NTP, you must enable it using the configuration files or the Aastra Web UI.
You can specify up to three time servers in your network.
Configuring NTP Servers (optional)
Use the following procedure to enable/disable and configure the NTP servers
using the configuration files.
Use the following procedure to enable/disable the NTP server using the IP Phone
UI.
Note: The IP phones support NTP version 1.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Time Server
Settings” on page A-28.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2Select Time and Date.
3 Select Time Server.
Note: The Timer Server is disabled by default.
4 Press Enable to enable the Time Server.
5 Press Done to save the change.