Filter
Top Products
Basic Preferences (Aastra Web UI)
An administrator can configure the following basic preferences using the Aastra
Web UI:
• General Preferences
— Local Dial Plan
A dial plan that describes the number and pattern of digits that a user dials
to reach a particular telephone number.
— Dial Plan Terminator
A dial plan terminator or timeout. When you configure the IP phone to
use a dial plan terminator (such as the pound symbol (#)) the phone waits
4 or 5 seconds after you pick up the handset or press a key to make a call.
— Digit Timeout
Represents the time, in seconds, to configure the timeout between
consecutive key presses.
— Park Call (users and admin)
The parking of a live call to a specific extension. This feature on the Basic
Preferences screen is available on the 55i, 57i, and 57i CT only.
— Pickup Parked Call (users and admin)
Picking up a parked call at the specified extension. This feature on the
Basic Preferences screen is available on the 55i, 57i, and 57i CT only.
— Suppress DTMF Playback (users and admin)
Enables and disables suppression of DTMF playback when a number is
dialed from the softkeys or programmable keys.
— Display DTMF Digits (users and admin)
Enables and disables the display of DTMF digits on the IP phone display
during a connected state.
— Play Call Waiting Tone (users and admin)
Enable or disables the playing of a call waiting tone when a caller is on an
active call and a new call comes into the phone.
— Stuttered Dial Tone (users and admin)
Enable or disables the playing of a stuttered dial tone when there is a
message waiting on the IP phone.