Filter
Top Products
Operational Features
5-30 41-001160-00, Rev 01 Release 2.0
IP Phone Administrator Guide
Operational IP Phone Features
2 For softkeys, in the "Type" field, select the type of softkey you want to configure.
For programmable keys, in the “Hard Key” field, select the hard key type you want to configure.
Reference: For available type values on each IP phone model, see Appendix A, the section,
“Softkey/Programmable Key/Feature Key Parameters” on page A-108.
3 For softkeys, If applicable, enter a label in the “Label” field.
4 In the "Value" field, enter a value to associate with the softkey or programmable key. For example, for
a speeddial value, you can enter *1.
5 In the "Line" field, select the line for which you want to associate the softkey or programmable key.
6 The operational states display to the IP phone when a softkey is used. To disable an operational
state, click the "Idle", "Connected", "Incoming", or "Outgoing" fields to uncheck the box.
7 Click to save your changes.
8 Click on Operation->Reset.
9 In the "Restart Phone" field click to restart the IP phone.
Aastra Web UI