Filter
Top Products
FMG3024-D10A / FMG3025-D10A Series User’s Guide 223
CHAPTER 25
Time Setting
25.1 Overview
You can configure the system’s time and date in the Time Setting screen.
25.2 The Time Setting Screen
To change your Device’s time and date, click Maintenance > Time. The screen appears as shown.
Use this screen to configure the Device’s time based on your local time zone.
Figure 116 Maintenance > Time Setting
The following table describes the fields in this screen.
Table 79 Maintenance > System > Time Setting
LABEL DESCRIPTION
Current Date/Time
Current Time This field displays the time of your Device.
Current Date This field displays the date of your Device.
Time and Date Setup
Time Protocol This shows the time service protocol that your time server sends when you turn
on the Device.
Time Server
Address
Enter the IP address or URL (up to 31 extended ASCII characters in length) of
your time server. Check with your ISP/network administrator if you are unsure
of this information.
Time Zone Choose the time zone of your location. This will set the time difference between
your time zone and Greenwich Mean Time (GMT).