Filter
Top Products
User Guide for the Polycom VVX 1500 D Phone
2 - 26
The following figure shows what the touch screen looks like when the
far-site stops or disables video.
Updating Video Settings
Video settings allow you to update:
• Video Call Settings—to enable or disable near-site video at the start of all
calls, and to choose to display incoming video calls on the full screen or in
the window in the center of the touch screen. See Updating Video Call
Settings on page 2-27.
• Video Screen Mode—to change the way video appears in the window in
the center of the screen and on the full screen. See Updating the Way Video
Displays in the Window in the Center of the Screen and on the Full Screen
on page 2-30.
• Local Camera View—to view full screen video with or without the PIP,
and whether the PIP should display next to, or over, the full screen video.
See Updating the Way the PIP displays on page 2-31.
• Camera Settings—to change the clarity of near-site video, including the
brightness, contrast, and sharpness. See Updating Camera Settings on
page 2-34.
Note
Your system administrator can configure your phone so that your phone cannot
transmit and receive video at all, even on a call-by-call basis.
Note
When you adjust video settings, the changes will affect the next call.