Filter
Top Products
81
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
Incoming Call Tone
While using one line, you can be informed if another call arrives on the
other line by two tones. During an intercom call (p. 64) or while using the
Room Monitor feature (p. 72) or while listening to messages (p. 86, 91),
you can also be informed by two tones if a call arrives. If you set to ON,
this incoming call tone will be heard for as long as the line rings. To delete
the incoming call tone, set to OFF. To set the incoming call tone to sound
twice, set to “2”. Both the handset and base unit are preset to “2”.
Handset
Make sure the handset is not being used.
1
Press (CONF/FUNCTION).
2
Scroll to “Ringer setting” by pressing
Ö or Ñ, and press á.
3
Scroll to “Incoming call” by pressing Ö
or Ñ, and press á.
•The current setting will be displayed.
4
Select the desired setting, “On”, “Off” or
“2”, by pressing Ö or Ñ.
5
Press the right soft key ( ).
•A beep sounds.
•To exit the programming mode, press (OFF).
Base unit
Make sure the base unit is not being used.
1
Press (FUNCTION), and scroll to “Ringer
setting” by pressing Ö or Ñ, and press
á.
2
Scroll to “Incoming call” by pressing Ö
or Ñ, and press á.
•The current setting will be displayed.
3
Select the desired setting, “On”, “Off” or “2”,
by pressing Ö or Ñ.
4
Press á (Save).
•A beep sounds.
•To exit the programming mode, press (STOP/EXIT).
SAVE
Save directory
H
Ringer setting
Copy directory
Ringer tone
H
Incoming call
---------------
Incoming call
Incomin
tone :2
GF
SAVE
Ringer tone
H
Incoming call
---------------
Incoming call
Incomin
tone :2
GF
H
=Save
LINE1 LINE2
Save directory
H
Ringer setting
Date and time