Panasonic KX-TG2740S Telephone User Manual


 
Room Monitor Feature
72
This feature allows you to monitor a room through the handset or the base unit
by using the intercom feature. For example you can monitor a baby from
different areas of the house. You can call the handset or the base unit using the
extension number, to monitor the room. The called unit will not ring. When the
system has one or more additional handsets (p. 31), a handset user can monitor
through another handset. If you allow other users to monitor through your
handset or base unit, turn the feature on. If you want to prevent your unit from
being monitored by other extensions, leave this feature off (factory preset).
The destination unit must not be used and the destination handset must
be off the base unit (p. 73).
To turn the handset Room Monitor feature on
(to allow other users to monitor through your handset)
Make sure the handset is not being used.
1
Press (CONF/FUNCTION), and scroll to
Initial setting” by pressing Ö or
Ñ, and press á.
2
Scroll to “Room monitor” by pressing Ö
or Ñ, and press á.
3
Select “On” by pressing Ö or Ñ, and
press the right soft key ( ).
A beep sounds.
To exit the programming mode, press (OFF).
To prevent your handset from being monitored, select
Off” in step 3 and press
the right soft key ( ).
To turn the base unit Room Monitor feature on
(to allow the handset to monitor through the base unit)
Make sure the base unit is not being used.
1
Press (FUNCTION), and scroll to “Initial
setting” by pressing Ö or Ñ, and press
á.
2
Scroll to “Room monitor” by pressing Ö
or Ñ, and press á.
3
Select “On” by pressing Ö or Ñ, and
press á (Save).
A beep sounds.
To exit the programming mode, press (STOP/EXIT).
To prevent your base unit from being monitored, select “Off” in step 3 and press
á (Save).
SAVE
SAVE
Room monitor
000:On
GF
SAVE
Auto talk
H
Room monitor
Caller ID edit
Copy directory
H
Initial setting
2Way radio mode
LCD contrast
H
Room monitor
Caller ID edit
Copy directory
H
Initial setting
---------------
Room monitor
000:On
GF
H
=Save
LINE1 LINE2