Filter
Top Products
Intercom
66
Answering Intercom Calls
Handset
When an intercom call is being received, the
handset rings and the display shows the calling
extension.
Press , or (HOLD) (INTERCOM).
•You can also answer the call by pressing any dialing
button (0) to (9), (*) or (#) (Any Key Talk).
To end the intercom, press (OFF) or place the
handset on the base unit or the charger.
Auto Talk:
If you set the Auto Talk feature to ON (p. 23), you can answer a call by
lifting the handset off the base unit without pressing , or (HOLD)
(INTERCOM).
If you purchase an additional handset (p, 31), you can
answer a call by lifting it off the charger.
Base unit
When an intercom call is being received, the
base unit rings and the LOCATOR/INTERCOM/
TRANSFER indicator light flashes. The display
shows the calling extension.
Press (LOCATOR/INTERCOM/TRANSFER) or
(DIGITAL!SP-PHONE).
•The LOCATOR/INTERCOM/TRANSFER indicator
and the DIGITAL SP-PHONE indicator light.
To end the intercom, press (DIGITAL!SP-PHONE)
or (
LOCATOR/
INTERCOM/TRANSFER).
•The LOCATOR/INTERCOM/TRANSFER indicator
and DIGITAL SP-PHONE indicator lights go out.
•The ringer volume for internal calls follows the higher level of the two lines. When
the ringer volume is off for both lines (p. 24, 25), the handset and base unit will
ring at the LOW level for internal calls.
•You cannot change the ringer tone for internal calls.
SP
PRIVACY
[
1
]
Call from [0]
Intercom
01
MUTELINE1 LINE2
Intercom
01
Call from [1]
Ex. Handset 1 calling