Filter
Top Products
35
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
To redial the last number dialed on the handset
Press or , and press (PAUSE/REDIAL).
•You can select a line by pressing the left soft key ( ) or the middle soft key
( ), instead of pressing .
To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed with the handset are stored in the redial list.
1. Press (PAUSE/REDIAL).
•The last number dialed is displayed with
number 1.
2. Scroll to the desired number by pressing
Ö or Ñ.
•You can also scroll down through the list by pressing (PAUSE/REDIAL).
•To exit the list, press (OFF).
3. Press or .
•You can select a line by pressing the left soft key ( ) or the middle soft
key ( ), instead of pressing .
•To erase an item, repeat steps 1 and 2, and press (HOLD/CLEAR).
•If “No items stored” is displayed, the list is empty.
To put a call on hold
Press (HOLD/CLEAR) twice.
•“Hold” is displayed. The line status icon and
“” or “” flash.
•To transfer the call to the base unit or another
handset (if the system has one or more additional
handsets, p. 31), see page 67; to transfer to a
mailbox to allow the outside party to leave a
message there, see page 90.
•If a call is kept holding for 6 minutes, an alarm tone will start to sound.
After 4 additional minutes on hold the call will be disconnected.
To release the hold
From the handset, press the left soft key ( ) or the middle soft key
( ) for the line. From the base unit, press the line button.
•If another phone is connected on the same line (p. 102), you can also release the
hold by lifting its handset.
•If the system has one or more additional handsets (p. 31), another handset user
can also release the hold by pressing the left soft key ( ) or the middle soft
key ( ) for the line.
LINE2
LINE1
LINE2
LINE1
LINE2LINE1
LINE2
LINE1
LINE2
LINE1
333-4444
GF
--Redial list1--
SP
PRIVACY
[
1
]
Hold Line1
PLAYLINE1 LINE2
L1
Ex. Line 1 on hold.