Filter
Top Products
Base unit
Make sure the base unit is not being used.
1
Press (FUNCTION), and scroll to “Initial setting” by pressing
Ö or Ñ, and press á.
2
Scroll to “Set tel line” by pressing Ö
or Ñ, and press á.
3
Press á at “Line selection”.
•The current setting will be displayed.
4
Select the desired line selection, “Line1”,
“Line2” or “Auto”, by pressing Ö or Ñ,
and press á (Save).
•A beep sounds.
•To exit the programming mode, press (STOP/EXIT).
Special Features
80
Line Selection
The handset and base unit will automatically select a free line when you make a call by
pressing or on the handset or (DIGITAL!SP-PHONE) on the base unit. The unit
will also select the in-coming called line when you answer the in-coming call. You can
change the line selection of the handset and base unit. There are three options as following:
Line 1: Line 1 will be selected. Line 2: Line 2 will be selected.
Auto (factory preset): A free line will be selected (Line 1 has priority) when making a call by
pressing or on the handset or (DIGITAL!SP-PHONE) on the base unit. However,
when you call back using Caller ID information (p. 42, 87), the line that is indicated will be
selected. You can also select any line by pressing one of line soft keys ( or ) on
the handset or a line button on the base unit. When a call is being received, the called line is
selected when you press or or (DIGITAL!SP-PHONE) to answer the in-coming call.
Handset
Make sure the handset is not being used.
1
Press (CONF/FUNCTION), scroll to “Initial setting” by pressing
Ö or Ñ, and press á.
2
Scroll to “Set tel line” by pressing Ö
or Ñ, and press á.
3
Press á at “Line selection”.
•The current setting will be displayed.
4
Select the desired line selection, “Line1”,
“Line2” or “Auto”, by pressing Ö or Ñ.
5
Press the right soft key ( ).
•A beep sounds.
•To exit the programming mode, press (OFF).
SAVE
LINE2LINE1
Line selection
Incomin
:Auto
GF
SAVE
Caller ID edit
H
Set tel line
Set answering
---------------
H
Line selection
Set dial mode
Line selection
Incomin
:Auto
GF
H
=Save
Caller ID edit
H
Set tel line
Registration
---------------
H
Line selection
Set dial mode
LINE1 LINE2