Filter
Top Products
1 2 3
1 2 3
1 2 3
52
Directory
Base unit
Make sure the base unit is not being used.
1
Press (FUNCTION).
2
Press á at “Save directory”.
•The display shows the number of stored items
in the directory.
3
Enter a name, up to 16 characters with the
dialing buttons ((0) to (9)) (p. 53).
•To move the cursor, press Ü or á.
•If a name is not required, press Ö and go to
step 5.
4
Press Ö.
5
Enter a phone number, up to 22 digits.
•Each time you press (ERASE), a digit is
erased. To erase all of the digits, press and
hold (ERASE).
•To move the cursor, press Ü or á.
6
Press Ö.
•If you want to change the storing name or
number, press Ñ to reach the desired display
and change it.
7
Press á (Save).
•A beep sounds.
•
To continue storing other items, repeat from step 2.
•To exit the programming mode, press
(STOP/EXIT)
.
---------------
H
Save directory
Ringer setting
Enter name
Tom Jones
IH
G
=Next
Enter phone no.
0987654321
IH
G
=Next
•If a pause is required for dialing, (PAUSE/REDIAL) can be stored in a phone
number counting as one digit (p. 77).
•You can exit the programming mode any time by pressing (OFF).
•If the display shows “Directory Full” in step 2 on page 51, press (OFF) to
exit the programming mode. To erase other stored items from the directory, see
page 58.
Directory
0 item
G
Enter name
IH
G
=Next
1 2 3
Enter phone no.
IH
G
=Next
Tom Jones
098-765-4321
F
=Edit
H
=Save
1 2 3
Tom Jones
098-765-4321
G