Filter
Top Products
July 2006 Installing the 201i server in an Option 11C or Option 11C Mini
201i Server Hardware Installation 79
To install the cable
1 Attach the bracket assembly and cable as follows:
a. Below the card cage, temporarily remove the hardware that secures
cable connections to the Option 11C.
b. Temporarily remove any cabling that may interfere with the installation
of the intermediate SCSI cable bracket assembly.
c. Remove the two screws on the right side of the Option 11C I/O panel.
d. Attach the intermediate SCSI cable bracket assembly, using the
screws that were removed previously, so that the SCSI connector
appears on the right side of the Option 11C cabinet.
.
CAUTION
Risk of equipment damage
You must power off the 201i server before connecting or
disconnecting SCSI cables.
ATTENTION
Before you disconnect the cabling, take the
telephony equipment services associated with the
cabling out of service.