Filter
Top Products
Installing the 201i server in the Succession 1000 system Standard 1.03
108 CallPilot
Installing the NTRH3502 SCSI cable for
Succession 1000
Introduction
Before you can connect a CD-ROM or tape drive to the 201i server, you
must install the NTRH3502 SCSI cable. The NTRH3502 SCSI cable has a
low profile right-angle connector that allows the cable to be connected to the
201i server faceplate when the Media Gateway or Media Gateway
Expansion cover is installed. This allows the external SCSI device to remain
permanently connected to the 201i server.
CD-ROM and tape drive cabling diagram
The following diagram shows how the intermediate SCSI cable, CD-ROM
drive, and tape drive are connected to the 201i server. The CD-ROM drive is
the first device. The tape drive is the last device:
Succession 1000
Media Gateway or
Media Gateway
Expansion
201i cabling Peripheral cabling
201i
NTRH30AA
Optional
NTRH9038
Tape drive
NTRH9105
CD-ROM
drive
CD-ROM drive SCSI
cable NTRH3502
G101615
Tape drive SCSI cable
NTRH3502
SCSI adapter
A0769312