Filter
Top Products
About the 201i server Standard 1.03
14 CallPilot
201i server description
Introduction
The 201i server is a flexible multimedia telephony server designed to
integrate with Nortel Meridian 1
*
and Succession
*
1000 products.
The 201i server occupies two slots of a Meridian 1 shelf or Succession 1000
Media Gateway or Media Gateway Expansion. When the server is locked
into position, its connectors attach to the backplane, which provides power
and communications links.
RoHS compliance
In the latter part of 2006, Nortel is phasing in RoHS-compliant 201i
servers in countries affected by the EUED (European Union Environmental
Directives). This hardware replaces or supplements the non-RoHS version.
In general, the RoHS parts are backwards compatible with the supported
software, and they have equivalent functionality to the parts they are
replacing. RoHS refers to the Reduction of Hazardous Substances
Directive.
The text and diagrams in this guide refer to the part numbers for non-RoHS-
compliant servers. If you are installing a RoHS-compliant server, see
Appendix A, “RoHS part conversion table,” for a listing of each RoHS-
compliant part mapped to the equivalent non-RoHS-compliant part.
Primary components
The 201i server motherboard houses the interfaces needed:
to communicate with the Meridian 1 switch or Succession 1000 system
to facilitate data communications on Ethernet networks.