Filter
Top Products
July 2006 Connecting peripheral devices to the 201i server
201i Server Hardware Installation 149
To connect the CD-ROM and tape drives to the
201i server (Succession 1000)
1 Connect the first SCSI device.
2 Follow instructions below:
3 Connect an additional device in a daisy chain if required, using either the
SCSI cable supplied with the device or an NTRH3502 cable.
IF the first
device is the THEN
CD-ROM drive do the following:
a. Attach the A0769312 SCSI adapter to the
CD-ROM drive.
b. Connect the NTRH3502 SCSI cable that you
installed earlier on the Succession 1000 Media
Gateway or Media Gateway Expansion to the SCSI
adapter on the CD-ROM drive.
tape drive connect the NTRH3502 SCSI cable that you installed
earlier on the Succession 1000 Media Gateway or
Media Gateway Expansion to the tape drive.