Filter
Top Products
July 2006 Connecting peripheral devices to the 201i server
201i Server Hardware Installation 153
Option 11C Mini or Succession 1000 to a screw on the back of the
cabinet
3 Connect the connector on the multi I/O cable that is labeled as ELAN to
the switch network hub.
4 If CLAN is required, connect the connector on the multi I/O cable that is
labeled as CLAN to the CLAN 10- or 100Base-T-compliant network hub
.
What’s next?
Continue with “Connecting the modem” on page 154.
G101593
Drain wire