Filter
Top Products
July 2006 Connecting peripheral devices to the 201i server
201i Server Hardware Installation 143
Selecting the procedure for your switch
To connect the CD-ROM and tape drives to the
201i server (Meridian 1)
Note: If you are connecting the SCSI devices to the Option 11C, go to page
145. If you are connecting the SCSI devices to the Option 11C Mini, go to
page 147.
1 Connect the first SCSI device.
2 Follow instructions below:
IF you are working with THEN see
a large Meridian 1 switch
(such as Option 51)
“To connect the CD-ROM and tape drives
to the 201i server (Meridian 1)” on page
143.
Option 11C “To connect the CD-ROM and tape drives
to the 201i server (Option 11C)” on page
145.
Option 11C Mini “To connect the CD-ROM and tape drives
to the 201i server (Option 11C Mini)” on
page 147.
Succession 1000 “To connect the CD-ROM and tape drives
to the 201i server (Succession 1000)” on
page 149.
IF the first device is the THEN
CD-ROM drive connect the CD-ROM drive to the
NTRH1410 cable that you connected earlier
to the Meridian 1 I/O panel.